Hi, 2.18.18 should be fine: https://dcpomatic.com/download/2.18.18
but I also uploaded 2.18.16: https://dcpomatic.com/download/2.18.16
The switch in naming of "none" to "DCI X'Y'Z'" is unrelated - it's just an attempt to make that drop-down consistent (it is supposed to specify which colourspace the given source is in, not what colour transform will be applied).
XYZ prores problem
-
- Site Admin
- Posts: 2851
- Joined: Thu Nov 14, 2013 2:53 pm
Re: XYZ prores problem
I'd be very grateful if those who are having problems could test this build:
and let me know how you get on.
Let me know if you would like to test on Linux, and I can make an installer for you.
and let me know how you get on.
Let me know if you would like to test on Linux, and I can make an installer for you.
-
- Posts: 3010
- Joined: Tue Apr 15, 2014 9:11 pm
- Location: Germany
Re: XYZ prores problem
Hi Carl - assuming I choose 'Custom' in source color space and set everything like this:
Will this result in an actual 'none' color conversion? Because, for experimental reasons, it could be interesting to actually prepare some content externally and just pass through into the J2C encoder.
Or is the DCI X'Y'Z' option the same?
Will this result in an actual 'none' color conversion? Because, for experimental reasons, it could be interesting to actually prepare some content externally and just pass through into the J2C encoder.
Or is the DCI X'Y'Z' option the same?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 13
- Joined: Wed Sep 17, 2025 2:03 pm
Re: XYZ prores problem
I’m currently making a DCP now,- using version 2.18.18 and will test it on a NEC cinema projector Monday I will keep you updated
-
- Posts: 13
- Joined: Wed Sep 17, 2025 2:03 pm
Re: XYZ prores problem
And I will make one using the new build as well https://dcpomatic.com/temp/prores-snafu ... 10.10+.dmg
Thanks for your help and support on this
Thanks for your help and support on this
-
- Posts: 65
- Joined: Mon May 17, 2021 1:15 pm
Re: XYZ prores problem
this build (877dd7904) works perfectly. Even better than versions 2.16 or <=2.18.18. X'Y'Z' values are now respected with the DCI X'Y'Z' option.
-
- Site Admin
- Posts: 2851
- Joined: Thu Nov 14, 2013 2:53 pm
Re: XYZ prores problem
Thanks for checking. Assuming Tony's test goes well I'll release a new version tomorrow.
-
- Posts: 13
- Joined: Wed Sep 17, 2025 2:03 pm
Re: XYZ prores problem
XYZ ProRes 4444 – Green Tint Issue in DCP-o-matic
Hi
After updating to the latest build I reopened my existing project and recreated the DCP. Unfortunately, I’m still seeing the same problem when projecting — the XYZ overlay is still apparent, and the image comes out with a green tint rather than correct colour.
The source file is a ProRes 4444 in native XYZ 2.6 gamma. I’m wondering if this could be because I reopened the older project rather than starting a fresh one, meaning the source colour space setting wasn’t picked up correctly.
I’m making a short clip now to test street away I’ll get back to you in 10 mins
Hi
After updating to the latest build I reopened my existing project and recreated the DCP. Unfortunately, I’m still seeing the same problem when projecting — the XYZ overlay is still apparent, and the image comes out with a green tint rather than correct colour.
The source file is a ProRes 4444 in native XYZ 2.6 gamma. I’m wondering if this could be because I reopened the older project rather than starting a fresh one, meaning the source colour space setting wasn’t picked up correctly.
I’m making a short clip now to test street away I’ll get back to you in 10 mins
-
- Site Admin
- Posts: 2851
- Joined: Thu Nov 14, 2013 2:53 pm
Re: XYZ prores problem
This could explain it, yes...
-
- Posts: 13
- Joined: Wed Sep 17, 2025 2:03 pm
Re: XYZ prores problem
Hi Carl and everyone,
I started a new project to test whether the issue was due to loading my old project (which may not have applied the correction properly). I can confirm that with the update 877dd7904, the conversion is now working correctly.
Thank you so much — you’re a lifesaver!
I started a new project to test whether the issue was due to loading my old project (which may not have applied the correction properly). I can confirm that with the update 877dd7904, the conversion is now working correctly.
Thank you so much — you’re a lifesaver!